12m 40ft Q460 Hot-Dip Galvanized Octagonal Steel Utility Pole – 3-Section Slip-Jointed Power Distribution Pole with Internal Cross Reinforcement

Product Name

12m 40ft Q460 Hot-Dip Galvanized Octagonal Steel Utility Pole – 3-Section Slip-Jointed Power Distribution Pole with Internal Cross Reinforcement

Keywords

12m steel utility pole, 40ft octagonal utility pole, Q460 power distribution pole, HDG octagonal pole, 3-section slip-jointed pole, internal cross reinforcement pole, hot dip galvanized utility pole, octagonal power pole.

Product Overview

This 12 m / 40 ft Q460 hot-dip galvanized octagonal steel utility pole is a project-based power distribution pole. It uses a 3-section slip-jointed structure and internal cross reinforcement. The pole is manufactured to approved drawings, including section lengths, hole positions, slots, climbing rungs, grounding nuts, flanges and other accessories. It is suitable for overhead distribution lines and utility network projects where Q460 steel and HDG corrosion protection are specified.

Buyer Problem 

Common procurement risks for distribution poles include:

• Hole positions not matching line hardware.

• Slip-joint length or orientation not matching the installation plan.

• Galvanizing thickness not meeting project specification.

• Section lengths causing transport or site assembly problems.

• Unclear design load, buried depth and foundation conditions.

• Delivery delays caused by unapproved drawings or unclear technical requirements.

Solution / How It Works

Each pole is produced from Q460 high-strength low-alloy steel, formed into an octagonal section, fitted with internal cross reinforcement at specified positions, and hot-dip galvanized after fabrication. The 3-section slip-jointed design supports transport and site assembly. Hole drilling, slots, rungs, grounding nuts and flanges are made according to the approved drawing. Before shipment, dimensions, welds, galvanizing and marking are checked according to the order inspection plan.

Specifications

Applications

• Overhead power distribution lines.

• Utility networks and rural electrification.

• 12 m / 40 ft class distribution pole projects.

• Corrosive outdoor environments where HDG is required.

• Projects requiring custom holes, climbing rungs, grounding nuts or flanges.

Not suitable for: high-voltage transmission towers or substation structures unless approved by project design.

How to Choose / Inquiry Checklist

To quote accurately, please provide:

1. Approved drawing or sketch.

2. Total length and buried depth.

3. Q460 grade and impact temperature.

4. Octagonal diameter/taper and wall thickness.

5. Section lengths and slip-joint overlap.

6. Hole/slot positions and diameters.

7. Flange, base plate, rung, grounding nut requirements.

8. Galvanizing standard and thickness.

9. Design load, wind/ice conditions and safety factor.

10. Quantity, destination port and required certification.

Quality Control & Evidence

Documents can include material certificate, dimensional inspection report, weld inspection report, galvanizing thickness test, load test report if required, packing list and container loading plan. Actual documents depend on order and project specification. FUTAO will provide real factory, certificate and inspection information. No fabricated certificates, clients or test data.

Packing & Delivery

Poles are packed with steel strapping and wooden battens, with end protection. Loading method depends on length, quantity and destination. Delivery time is confirmed after drawing approval, quantity and galvanizing schedule.

FAQ

Q1: Is this pole 12 m or 40 ft?
A: 12 m is approximately 40 ft. Final total length, buried depth and section lengths are made to drawing.

Q2: What is Q460?
A: Q460 is a Chinese high-strength low-alloy structural steel grade. Confirm Q460B/C/D and impact temperature before order.

Q3: What does 3-section slip-jointed mean?
A: The pole is supplied in 3 sections that overlap and slip together on site. Overlap length and orientation must follow the approved drawing.

Q4: Why internal cross reinforcement?
A: It is used at specified sections to reinforce the pole body or connection area. Exact design purpose must follow the approved drawing.

Q5: Is it hot-dip galvanized?
A: Yes, HDG. Thickness and standard are to project specification, such as ASTM A123 or ISO 1461.

Q6: Can you customize holes, rungs, grounding nuts and flanges?
A: Yes, according to drawings.

Q7: What information is needed for quotation?
A: Drawing, length, Q460 grade, section layout, diameter/thickness, hole positions, galvanizing standard, quantity and destination port.

Q8: What documents can be provided?
A: Material certificate, dimensional report, galvanizing test, weld inspection, load test if required and packing list. Actual documents depend on order.

Q9: What is the MOQ and delivery time?
A: MOQ is project-based and negotiable. Delivery is confirmed after drawing, quantity and galvanizing schedule.

Q10: How is it packed?
A: Steel strapping, wooden battens and end protection, suitable for container or break bulk.

Contact Us

Send your drawing and project requirements. Our engineer will check the pole design and reply with selection confirmation, drawing review, quotation and delivery estimate.

• Company: Futao Metal Structural Unit Co., Ltd.
• Official Website: http://www.metalpowerpole.com
• WhatsApp: 0086-13812516912,13665163520
• Email: li@fu-tao.com,sales2@futaogroup.com